0

Your Cart

Your cart is empty

A compact, connected bathroom solution for site facilities

A modular ensuite gives a site a private place to shower and use the toilet without building a conventional bathroom from the ground up. ITO’s category range is intended for locations such as construction sites, remote work areas and temporary facilities where compact, transportable amenities are useful. Each current category configuration brings a toilet, shower and hand basin together in one small building, allowing the facility to sit alongside offices, accommodation or other site infrastructure.

The key planning point is services. These ensuites are designed to connect to mains-pressure water and sewer or septic systems; they are not designed to hold waste onboard. Standard units typically use a 10A power supply via an inlet socket. Confirm the water, wastewater and electrical arrangements at the proposed location before choosing a unit, particularly where the site is remote or services are not yet established.

Instant Transportable Offices provides modular ensuite hire throughout Perth and regional Western Australia, while purchased units are available Australia-wide. The broader ITO team reports more than 22 years of experience, 7,000+ buildings designed and manufactured, and 60,000+ hire projects completed. That experience can inform the practical questions behind a compact bathroom facility: placement, vehicle access, lifting method, service routes and the level of setup support required.

Features included in your new ensuite

Features included in your new ensuite

Toilet, shower and hand basin

Toilet, shower and hand basin

The category range brings the core bathroom functions together in one transportable unit. Current ITO descriptions list a vitreous china toilet suite, hand basin with vanity and mirror, and a fibreglass shower base with curtain and rail. Confirm the specification for the selected model before ordering.
Connected services design

Connected services design

These ensuites are designed for mains-pressure water plus sewer or septic connections, rather than onboard waste storage. Power and water connections are located externally, and ITO says a standard unit typically uses a 10A inlet. Final connection scope depends on the site and should be confirmed before delivery.
Insulated panel construction

Insulated panel construction

The current category specification refers to insulated panel walls and roof, with water-resistant PVC flooring and timber-look vinyl. These material details are useful for a hard-working bathroom facility, but final materials can differ by model or order. Confirm them in the relevant product information and quotation.
Lighting and ventilation

Lighting and ventilation

ITO’s current category information lists internal LED lighting and exhaust fans. These features support a practical bathroom environment in a compact layout. Treat them as current range features rather than an automatic promise for every future configuration, and ask ITO to verify inclusions against the selected product.
Transportable handling

Transportable handling

Engineered lifting points allow the units to be moved by Hiab, crane or tilt tray, while suitably sized forklifts can assist with manoeuvring. The lifting plan, site access and final placement method should be assessed for the individual project rather than assumed from the unit alone.

Suitable applications

Portable modular ensuites suit construction sites and remote work areas that need a compact shower-and-toilet facility close to the team using it. They can also support temporary facilities where a private, connected bathroom is needed without a permanent build on site. On accommodation projects, a separate ensuite can add amenity near sleeping or living buildings when the layout and services allow.

Before selecting this product category, check the available water supply, wastewater destination, power and access route. If the site cannot provide the required connected services, ask ITO about a more suitable toilet and ablution solution rather than assuming an ensuite can manage stored waste.

From brief to connected facility

Start with the project brief: whether the unit is for hire or purchase, the intended users, the site location, available services and the proposed placement. For purchased buildings, ITO can discuss the applicable configuration and quotation. Where approvals are required, ITO offers assistance with local-authority approvals; related costs are not included unless they are specifically itemised in the formal quotation.

Once the scope is agreed, the building can be prepared for delivery. ITO can provide or coordinate delivery, positioning, levelling, tie-downs and associated site preparation where these works form part of the project. The exact approach depends on ground conditions, access, the building and engineering or project requirements.

After placement, ITO can coordinate the water, wastewater, electrical and communications work needed to make a building operational. A site plan showing service locations, or a site visit where services are unclear, helps define an accurate connection scope. Utility charges and certain works may be billed separately, so confirm responsibilities in the quotation.

For a transportable building fixed to a site for the first time, a building permit will normally be required in Western Australia. Approval requirements vary with the site and project, so confirm the applicable pathway with the relevant authority and ITO before work begins.

Frequently Asked Questions

No. ITO’s modular ensuites are designed to connect to mains-pressure water and a sewer or septic system. They are not designed to store their own waste. Ask ITO about an alternative toilet and ablution solution if a connected wastewater service is unavailable.

Yes. ITO hires modular ensuites across Perth and regional Western Australia. Availability, delivery and setup requirements should be confirmed for the specific location and project.

Yes. ITO offers modular ensuites for sale Australia-wide. Discuss the destination, site access and delivery requirements when requesting a purchase quote.

Yes. While we’re based in WA, our modular ensuites are available for sale Australia-wide. We can manufacture to your specifications and organise delivery to most metro and regional locations.

The unit is designed for mains-pressure water and sewer or septic connection. Standard units typically require a 10A power supply through an inlet socket. Connection routes and existing site services need to be checked before installation.

ITO states that its modular ensuites have lifting points for Hiab, crane or tilt-tray movement, and can be manoeuvred with a suitably sized forklift. The appropriate method depends on site access, placement and the project lifting plan.

ITO can provide or coordinate delivery, positioning, levelling, site preparation and service connections as part of its project services. The work is site-specific, so ask for a defined scope and quote.

It may be necessary, depending on the location and how the unit is fixed and used. ITO offers approval assistance, and its team can explain the documentation and costs that apply to a particular project. Do not proceed on the assumption that approvals are included unless they are itemised in the quote.